EDGE-60R V2 UHF Reader

Ruggedized reader built around the powerful M6e UHF RFID module. With integrated antenna and designed to operate in harsh / industrial environmental is ideal for deployment in a wide variety of indoor and outdoor applications.

Advantages

Harsh environment (IP66);
Excellent performance;
Ethernet;
Isolated RS-485;
Isolated RS-232;
Isolated GPIO.

Technical Specification: EDGE-60R READER

Transponder Protocols

Protocols

ARTEFATO PA SJ5511 v.1.0¹;
SINIAV G0 v.1.0.0¹;
BRASIL-ID P63¹;
EPC Gen2 (ISO 18000-6C);
ISO 18000-6B.

Custom commands implemented

Artefato PA SJ5511 Protocol

Activate_Secure_Mode;
Authenticate_OBU.

xSiniav G0 Protocol

Activate_SINIAV_Mode;
OBU_Auth_ID;
OBU_Auth_Full_Pass1;
OBU_Auth_Full_Pass2;
OBU_Auth_Full_Pass (Pass1 + Pass2);
OBU_ReadFromMemMap;
OBU_WriteToMemMap.

Brasil-ID P63 Protocol

ReadSec;
WriteSec.

EPC Gen2 (ISO 18000-6C) Protocol

All mandatory commands (Read, Write, Lock, ReadMemBlock, WriteMemBlock, etc).

RF Interface

RF Power Output

Separate read and write levels, command adjustable from 5 to 30 dBm (1W) with ±0.5 dBm accuracy above +15 dBm².

Regulatory (Pre-configured for the following regions)

ANATEL (BR) 902 - 907 MHz e 915 - 928 MHz;
FCC (NA) 902 - 928 MHz;
ETSI (EU, IN) 865,6 - 867,6 MHz.

Mode

Frequency Hopping or Fixed Frequency (Configurable frequency hoptable).

RF Modulation

PR-ASK.

RF Encoding

FM0, Miller M2, M4 and M8.

Backscatter Link Frequency (BLF)

250 kHz, 320 kHz and 640 kHz.

Performance

Max Read Rate

Up to 750 tags/second using high-performance settings.

Max Tag Read distance

Over 30 feet (9 m) with 12.5dBi antenna (36dBm EIRP)³.

Power

DC Power required

DC Voltage: 24VDC ± 1%;
Max Ripple: 200mVpp.

DC power consumption @ RF level

Max 15W @30dBm;
With maximum duty cycle.

Control / Data Interface

Connectors

Power, Communication and GPIO (shielded cable)
Industrial M23 Signal Straight Connector IP66 (connected);
External antenna
N type connector 50O IP66 (connected).

Data Communication

Serial:
RS-485 Full-Duplex
Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E)
5KV RMS fully isolated
High common-mode transient immunity: >25 kV/µs
±15 KV ESD protection on RS-485 input/output pins
Surge protection (Overvoltage and Overcurrent) with a coordinate scheme using GDT - TBU - TVS;
Ethernet:
Data rate: 10/100Mbps
1.5 KVAC isolated
Surge protection (Overvoltage and Overcurrent) with a coordinate scheme suing GDT - TBU - TVS.

GPIO

2x Opto-Isolated Digital Input:
1KV RMS fully isolated
Dry contact and Wet contact (any polarization) scheme supported
Minimum pulse width: 100ms
3.0 ~ 24.0VDC - High level
0 ~ 2.0VDC - Low level;
2x Opto-Isolated Digital Output:
1KV RMS fully isolated
Open collector output type
Max. Current sink: 400mA
Max. Voltage sourcing: 40V.

Shielded Cable

2 twisted pairs 24AWG (UTP) + 8 twisted pairs 22AWG;
Shield: bare copper braid 90% with tape viscose;
Cover: PU polyurethane compound 1.2mm thick;
Outside diameter: 12mm ±0,5mm.

API support

C#/.Net, Java, C (Include samples, source codes and Demo Software).

Mechanical / Environmental

Water Tightness

IP66 (with M23 correctly attached).

Integrated antenna

12.5dBi gain;
Linear Horizontal or Vertical polarization (See more details on antenna table).

Dimensions

450 x 450 x 79mm [LxWxH].

Weight

6Kg ±0.5Kg.

Operational temperature

-10°C a + 65°C.

Storage temperature

-10°C a + 70°C.

Humidity

95%.

Mounting

Both wall and pole mount (Pole size Ø 1" to 1.75" - 1.75" to 3").

Adjustable positions (angles)

40° ±3°Azimuth axis (Horizontal) e 30° ±3° Elevation axis (Vertical).

Mechanical shock

IEC 60721-3-4 4M5.

Technical Specification: INTEGRATED ANTENNA

Technical Specification: INTERFACE BOARD (150514) - Code: 100.273

Control / Data Interface

Connectors

Alimentação:
Conector Jack 2,5mm com rosca de travamento (P8)
Terminal tipo Borne removível para cabos/fios 12-24 AWG (P7)
Terminal parafuso M3 (P9);
Comunicação:
Conector DB9 fêmea (conector J1)
Terminal tipo Borne removível 12-24 AWG (P1, P3 e P6)
Terminal parafuso M3 (conector P2);
GPIO:
Terminal tipo Borne removível 12-24 AWG (P4 e P5).

Serial data communication

Communication between Reader and Interface Board
RS-485 Full-Duplex;
Communication between Interface Board and Host
RS-232 or RS-485 Full-Duplex selection through DipSwitch;
1x RS-485 Full-Duplex (Reader <-> Interface Board) (P3)
1x RS-485 Full-Duplex (Interface Board <-> Host) (P6)
Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E)
5KV RMS fully isolated
High common-mode transient immunity: >25 kV/µs
±15 kV ESD protection on RS-485 input/output pins
Open - Short-circuit, fail-safe receiver inputs
Data rate: 9600 to 921.600 bps;
1x RS-232 (Interface Board <-> Host) (P6 e J1-DB9)
Meets EIA/TIA-232E specifications
2.5KV RMS fully isolated
High common-mode transient immunity: >25 kV/µs
ESD protection on in and out pins: ±8 kV: contact discharge
ESD protection on in and out pins: ±15 kV: air gap discharge
Data rate: 9.600 a 921.600 bps.

Visual feedback

Power led (On/Off);
Signal led indication (TX/RX);
Interface led indication (RS232 or RS485).